Technical Specification
STANDERS | MODEL-400×1500 |
Lathe Machine Type | Center Lathe |
Nature of Duty of Operation of Lathe | Light Duty Lathe |
Distance Between Centers x Swing over Bed (mm) | 1500 x 400 |
Swing Over Bed (in mm) | 400 |
Center Height in mm | 200 |
Swing Over Cross Slide in mm | 200 |
Swing Over Carriage Wing in mm | 250 |
Swing in Gap in mm | 550 |
Width of gap in Front in mm | 100 |
Type of Bed | Inverted V Type |
Length of Bed in mm | 2400 |
Width of Bed in mm | 280 |
Gap in Bed in mm | 100 |
Maximum Feed Force | 2000 |
Maximum Facing Diameter in mm | 400 |
Max. Weight of Work Piece that can be held between chuck and Supported by live center in kg | 60 |
Max. Weight of Work Piece that can be held between chuck and Supported by Dead center in kg | 200 |
Maximum Torque of Spindle in mm | 5 |
Size of Spindle in mm | 50 |
Type of Chuck | 3 Jaw Self Centered |
Travel of Cross Slide in mm | 200 |
Travel of Top Slide in mm | 100 |
Main Motor Power in KW. | 3 |
Type of Power Supply | 3 Phase |
Coolant Pump Output in KW | 0.12 |
Dimensional Parameters | |
Minimum Chucking Diameter in mm | 25 |
Maximum Chucking Diameter in mm | 200 |
Tail Stock Sleeve Diameter in mm | 50 |
Maximum offset of Tailstock on either side of Center Line in mm | 5 |
Sleeve Travel Type ( Tail Stock ) | Manual |
Length of Lathe Machine in mm | 3000 |
Width of lathe Machine in mm | 1100 |
Height of Lathe Machine in mm | 1300 |
Weight if lathe Machine with electrical and std.acc in | 1000.KG |
Tail Stock Spindle Taper | MT4 |
Travel of Sleeve in mm | 150 |
Hardness of Bed Guide ways in HRC | 41 |
Lead Screw Diameter in mm | 32 |
Lead Screw Pitch in mm | 6 |
Longitudinal Lead Screw Feed Range in mm/min | 0.06 To 1.00 |
Cross Feed Range in mm/min | 0.16 TO 0.24 |
Metric Thread Range in mm/min | 0.5 – 7 |
British Thread Range in TPI | 4-60 |
Module Thread Range in mm | 3.5 |
Diameteral Pitch Range in mm | 24 |
Type of Lubrication | OIL BATH |
Colour of Lathe machine | DOUBLE TONE CREAM BLUE |
Performance Parameters | |
Manual Operated Lathe | yes |
Geared Mechanism | yes |
Type of Spindle | Metric |
Type of Spindle Nose | A-2-5 |
Taper in Spindle Bore | MT-5 |
Taper in Spindle Sleeve | MT-4 |
Bore Size in mm | 50 |
Range of Spindle Speed in Forward Direction | 45-1200 |
Range of Spindle Speed in Reverse Direction | 45-1200 |
Type of Tool Holder | SQARE |
Tool Shank Size As | 20 x 20 |
Rapid Traverse Motor Poser in kw | 0 |
Type of Cooling | AIR COOL |
Speed of coolant Motor rev/min | 2700 |
Noise emitted by machine in db | 85 |
Mechanical Guarding | Yes |
In Possession of Technical Evaluation report | Yes |
Main Spindle Bearing Confirming Pre-loaded of Standard make | Yes |
Coolant Pump Discharge at maximum working Height as l/min | 35 |