MIHIR-GMT-CP-315X 
ALL GEAR HEAVY DUTY LATHE MACHINE MIHIR-300-1000 
MEDIUM DUTY LATHE MACHINE-MIHIR-250 
Description
- SS & SC ALL GEAR LATHE MACHINE
- CENTER LATHE MACHINE
- GAP BED LATHE MACHINE
- TOOL ROOM LATHE MACHINE
- PRECISION LATHE MACHINE
- GeM-Government-e-Marketplace-SS & SC All Gear Lathe Machine
Sale!
GEM Mihir – 500 X 1500
Rs. 475,200.00
1 in stock
Technical Specification
| STANDERS | MODEL-500×1500 |
| Lathe Machine Type | Center Lathe |
| Nature of Duty of Operation of Lathe | Light Duty Lathe |
| Distance Between Centers x Swing over Bed (mm) | 1500 x 500 |
| Swing Over Bed (in mm) | 500 |
| Center Height in mm | 250 |
| Swing Over Cross Slide in mm | 300 |
| Swing Over Carriage Wing in mm | 350 |
| Swing in Gap in mm | 600 |
| Width of gap in Front in mm | 100 |
| Type of Bed | Inverted V Type |
| Length of Bed in mm | 2400 |
| Width of Bed in mm | 280 |
| Gap in Bed in mm | 100 |
| Maximum Feed Force | 2000 |
| Maximum Facing Diameter in mm | 500 |
| Max. Weight of Work Piece that can be held between chuck and Supported by live center in kg | 60 |
| Max. Weight of Work Piece that can be held between chuck and Supported by Dead center in kg | 200 |
| Maximum Torque of Spindle in mm | 5 |
| Size of Spindle in mm | 50 |
| Type of Chuck | 3 Jaw Self Centered |
| Travel of Cross Slide in mm | 250 |
| Travel of Top Slide in mm | 100 |
| Main Motor Power in KW. | 3 |
| Type of Power Supply | 3 Phase |
| Coolant Pump Output in KW | 0.12 |
| Dimensional Parameters | |
| Minimum Chucking Diameter in mm | 25 |
| Maximum Chucking Diameter in mm | 200 |
| Tail Stock Sleeve Diameter in mm | 50 |
| Maximum offset of Tailstock on either side of Center Line in mm | 5 |
| Sleeve Travel Type ( Tail Stock ) | Manual |
| Length of Lathe Machine in mm | 3000 |
| Width of lathe Machine in mm | 1100 |
| Height of Lathe Machine in mm | 1300 |
| Weight if lathe Machine with electrical and std.acc in | 1000.KG |
| Tail Stock Spindle Taper | MT4 |
| Travel of Sleeve in mm | 150 |
| Hardness of Bed Guide ways in HRC | 41 |
| Lead Screw Diameter in mm | 32 |
| Lead Screw Pitch in mm | 6 |
| Longitudinal Lead Screw Feed Range in mm/min | 0.06 To 1.00 |
| Cross Feed Range in mm/min | 0.16 TO 0.24 |
| Metric Thread Range in mm/min | 0.5 – 7 |
| British Thread Range in TPI | 4-60 |
| Module Thread Range in mm | 3.5 |
| Diameteral Pitch Range in mm | 24 |
| Type of Lubrication | OIL BATH |
| Colour of Lathe machine | DOUBLE TONE CREAM BLUE |
| Performance Parameters | |
| Manual Operated Lathe | yes |
| Geared Mechanism | yes |
| Type of Spindle | Metric |
| Type of Spindle Nose | A-2-5 |
| Taper in Spindle Bore | MT-5 |
| Taper in Spindle Sleeve | MT-4 |
| Bore Size in mm | 50 |
| Range of Spindle Speed in Forward Direction | 45-1200 |
| Range of Spindle Speed in Reverse Direction | 45-1200 |
| Type of Tool Holder | SQARE |
| Tool Shank Size As | 20 x 20 |
| Rapid Traverse Motor Poser in kw | 0 |
| Type of Cooling | AIR COOL |
| Speed of coolant Motor rev/min | 2700 |
| Noise emitted by machine in db | 85 |
| Mechanical Guarding | Yes |
| In Possession of Technical Evaluation report | Yes |
| Main Spindle Bearing Confirming Pre-loaded of Standard make | Yes |
| Coolant Pump Discharge at maximum working Height as l/min | 35 |
Standard Accessories
| Standard Accessories | |
| Driving Plate with peg | Yes |
| Coolant Equipment & Swarf tray | Yes |
| Splash Guard | Yes |
| Spindle Reduction Sleeve | Yes |
| 60 Deg Dead Centre-2 Nos | Yes |
| Quick Change tool post with Tool Holders | Yes |
| Quick Change indexiable square tool post | Yes |
Optional Accessories
| Optional Accessories | |
| 3 jaw self Centering Chuck | Yes |
| Chuck Guard | Yes |
| Rear Tool Post | Optional ( Extra Cost ) |
| Universal face Plate | Optional ( Extra Cost ) |
| Precision face Plate | Optional ( Extra Cost ) |
| Cast Iron Face Plate | Yes |
| Collet Chuck & Collets | Optional ( Extra Cost ) |
| Rear Tool Holder | Optional ( Extra Cost ) |
| Steady Rest | Yes |
| Roller Steady Rest | Optional ( Extra Cost ) |
| Follow Rest | Yes |
| Longitudinal Stop | Optional ( Extra Cost ) |
| Roller Stop | Optional ( Extra Cost ) |
| Taper Turning Attachment | Yes |
| A Set of Change Gear For DP Threads | Optional ( Extra Cost ) |
| Multi Copying Attachment | Optional ( Extra Cost ) |
| Machine Lamp | Yes |
| Swarf Tray Complete with Coolant equipment | Yes |
| Four Jaw Chuck | Yes |
