Sale!
GEM 600 x 2000

GEM Mihir – 600 X 2000

Rs. 838,200.00

1 in stock

SKU: GEM010 Category: Tags: , , , ,

Description

  •  SS & SC ALL GEAR LATHE MACHINE
  •  CENTER LATHE MACHINE
  •  GAP BED LATHE MACHINE
  •  TOOL ROOM LATHE MACHINE
  •  PRECISION LATHE MACHINE
  • GeM-Government-e-Marketplace-SS & SC All Gear Lathe Machine

Technical Specification

STANDERS MODEL-600×2000
Lathe Machine Type Center Lathe
Nature of Duty of Operation of Lathe Light Duty Lathe
Distance Between Centers x Swing over Bed (mm) 2000x 600
Swing Over Bed (in mm) 600
Center Height in mm 300
Swing Over Cross Slide in mm 300
Swing Over Carriage Wing in mm 350
Swing in Gap in mm 700
Width of gap in Front in mm 100
Type of Bed Inverted V Type
Length of Bed in mm 3600
Width of Bed in mm 370
Gap in Bed in mm 100
Maximum Feed Force 3000
Maximum Facing Diameter in mm 600
Max. Weight of Work Piece that can be held between chuck and Supported by live center in kg 500
Max. Weight of Work Piece that can be held between chuck and Supported by Dead center in kg 3000
Maximum Torque of Spindle in mm 11
Size of Spindle in mm 75
Type of Chuck 3 Jaw Self Centered
Travel of Cross Slide in mm 300
Travel of Top Slide in mm 100
Main Motor Power in KW. 3.7
Type of Power Supply 3 Phase
Coolant Pump Output in KW 0.12
Dimensional Parameters
Minimum Chucking Diameter in mm 50
Maximum Chucking Diameter in mm 250
Tail Stock Sleeve Diameter in mm 57
Maximum offset of Tailstock on either side of Center Line in mm 5
Sleeve Travel Type ( Tail Stock ) Manual
Length of Lathe Machine in mm 3600
Width of lathe Machine in mm 320
Height of Lathe Machine in mm 300
Weight if lathe Machine with electrical and std.acc in 1800Kg
Tail Stock Spindle Taper MT-5
Travel of Sleeve in mm 150
Hardness of Bed Guide ways in HRC 41
Lead Screw Diameter in mm 38
Lead Screw Pitch in mm 12.70
Longitudinal Lead Screw Feed Range in mm/min 0.06 To 1.00
Cross Feed Range in mm/min 0.16 TO 0.24
Metric Thread Range in mm/min 1 – 15
British Thread Range in TPI 4-60
Module Thread Range in mm 1-4
Diameteral Pitch Range in mm 6-24
Type of Lubrication OIL BATH
Colour of Lathe machine DOUBLE TONE CREAM BLUE
Performance Parameters
Manual Operated Lathe yes
Geared Mechanism yes
Type of Spindle Metric
Type of Spindle Nose L-Type
Taper in Spindle Bore MT-5
Taper in Spindle Sleeve MT-4
Bore Size in mm 75
Range of Spindle Speed in Forward Direction 40-1000
Range of Spindle Speed in Reverse Direction 40-1000
Type of Tool Holder SQARE
Rapid Traverse Motor Poser in kw 0
Type of Cooling AIR COOL
Speed of coolant Motor rev/min 2700
Noise emitted by machine in db 85
Mechanical Guarding Yes
In Possession of Technical Evaluation report Yes
Main Spindle Bearing Confirming Pre-loaded of Standard make Yes
Coolant Pump Discharge at maximum working Height as l/min 35

Standard Accessories

Standard Accessories
Driving Plate with peg Yes
Coolant Equipment & Swarf tray Yes
Splash Guard Yes
Spindle Reduction Sleeve Yes
60 Deg Dead Centre-2 Nos Yes
Quick Change tool post with Tool Holders Yes
Quick Change indexiable square tool post Yes

Optional Accessories

Optional Accessories
3 jaw self Centering Chuck Yes
Chuck Guard Yes
Rear Tool Post Optional ( Extra Cost )
Universal face Plate Optional ( Extra Cost )
Precision face Plate Optional ( Extra Cost )
Cast Iron Face Plate Yes
Collet Chuck & Collets Optional ( Extra Cost )
Rear Tool Holder Optional ( Extra Cost )
Steady Rest Yes
Roller Steady Rest Optional ( Extra Cost )
Follow Rest Yes
Longitudinal Stop Optional ( Extra Cost )
Roller Stop Optional ( Extra Cost )
Taper Turning Attachment Yes
A Set of Change Gear For DP Threads Optional ( Extra Cost )
Multi Copying Attachment Optional ( Extra Cost )
Machine Lamp Yes
Swarf Tray Complete with Coolant equipment Yes
Four Jaw Chuck Yes

Related products